UniFi Android 11.2.1 adds WiFi Uplink, Matter device support, and custom client icons. It also introduces port anomaly details in Insights and improves port configuration and radio settings.

Improvements

• Added WiFi Uplink support, allowing users to select, search for, or manually join a WiFi network as an Internet connection, with captive portal support and connection status in Internet settings.

• Added a Matter section to Settings for viewing Thread networks, managing Matter devices, and commissioning new devices.

• Added Matter over Thread client details.

• Added a prompt to enable IPv6 when commissioning Matter devices if IPv6 is disabled.

• Added custom client icons, with options to generate icons from photos using AI or upload images.

• Added support for adopting multiple devices after console setup.

• Added port anomaly information to Insights Ports, including port details and Activity Logs.

• Added a floating Test & Confirm banner.

• Added a banner for Intrusion Prevention detection engine updates.

• Added initial support for the IPv6 Single Network interface type, along with IPv6 Gateway and Link-Local IP information in Network settings.

• Added Stacking and MC-LAG support to Port Configuration.

• Added Screen Timeout and Wake on Movement display settings for UTR devices.

• Added a Verizon certification message for U5G Max and U5G Max Outdoor.

• Added a Dashboard warning when notifications are disabled.

• Added a confirmation when selecting a non-recommended 2.4 GHz channel.

• Added support for additional event types in System Logs.

• Improved password strength validation messages.

• Simplified Radio settings with dropdown selectors.

• Updated network invitations to display the assigned role.

• Removed Port Isolation and Egress Rate settings on unsupported gateway ports.

Bugfixes

• Fixed Roaming Assistant validation when switching WiFi bands.

• Fixed an issue where Force WiFi 4 Mode could turn off immediately after being enabled.

• Fixed security mode selection and password validation for Open WiFi networks.

• Fixed outdated information appearing when changing WiFi WAN settings.

• Fixed an issue where UTR secondary WiFi could not be re-enabled.

• Fixed an issue where radio channel width and transmit power settings could fail to save.

• Fixed an issue where Environment Scan could fail to load on newer Network versions.

• Fixed an issue where Air Stats could fail to load in device details on Network 11.

• Fixed an issue where System Statistics could lose the selected view after each data update.

• Fixed an issue where System Logs could display a blank screen on some Network versions.

• Fixed an issue where Restore Default did not restore the default client icon.

• Fixed an issue where the controller menu could be cut off in landscape mode.

• Fixed an issue where the WiFi configuration form could disable all bands even when some access points supported them.

• Fixed an issue where Hotspot type selection was missing when Passpoint was unavailable.

UniFi Android 11.1.2 adds AI-powered client icon generation from photos, replaces WiFi Experience with uplink speed in the Devices list, and aligns Firewall Policy application categories with the web interface.

Improvements

• Added an option to generate client icons from photos using AI.
• Replaced WiFi Experience with uplink speed in the Devices list.
• Aligned application categories in Firewall Policy settings with the web interface.

Bugfixes

• Fixed an issue where App Blocking rules could be created when Traffic Identification was disabled.
• Fixed an issue where client icons could not be restored to default for offline clients.
• Fixed an issue where the Overview page for standalone access points displayed total transferred data instead of throughput.
• Fixed an issue where the Save button remained disabled after changing application categories in Firewall Policies.
• Fixed an issue where tapping Enable Traffic Identification in Insights had no effect.

UniFi Android 11.1.1 adds Safe Ops settings, support for SD-WAN networks, and port configuration improvements.

Improvements

• Added Safe Ops settings.
• Added support for SD-WAN networks in Network settings.
• Added UPS Safe Shutdown trigger point settings.
• Added WAN selection to Automatic Speed Test settings.
• Added a Change Icon shortcut to the local client screen.
• Added the ability to open client and device details directly from notifications.
• Added a confirmation dialog when disabling Teleport.
• Added an OpenVPN Server update notification with the ability to trigger the update.
• Added Linked Device settings to USP and UPS outlets with power cycle confirmation.
• Added VLAN conflict detection with warnings and confirmation dialogs to port configuration.
• Added VLAN ID labels to network items in the Networks screen.
• Added the UniFi Cellular Internet Backup option to Network settings.
• Added support for shortened IPv6 address formatting.
• Added SFP Wizard profile downloading and uploading.
• Improved the System Logs filter panel with Show More options.
• Improved VPN server address selection.
• Updated invitation dialogs to show the role being assigned.
• Updated schedule inputs with dropdown selectors.
• Disabled Port Mirroring on uplink ports.
• Disabled channel selection when IoT Optimization is enabled in WiFi settings.

Bugfixes

• Fixed an issue where the Dashboard Activity chart did not load.
• Fixed an issue where the Default network did not load.
• Fixed an issue where notifications could sometimes be missing.
• Fixed an issue where Saved Connections could show Express 7 as an unknown device.
• Fixed an issue where backups could be missing when restoring during console setup.
• Fixed IPv6 link-local address display in device Overview.
• Fixed an issue where device outlet settings did not update immediately.
• Fixed an issue where device details remained open after forgetting a gateway.
• Fixed an issue where Site Manager errors could be hidden during search or filtering.
• Fixed an issue where Force WiFi 4 Mode remained available when the 2.4 GHz band was unavailable.
• Fixed an issue where wired access points could incorrectly appear in the Dashboard meshing widget.
• Fixed an issue where the Remove option was available for blocked clients.
• Fixed an issue preventing Super Admins from accessing backups.

Latest release includes important bugfixes in WiFi, Port Configuration and Control Plane.

Improvements

• Application updates now require UniFi OS 5.1.33 or newer.

Bugfixes

• Fixed an issue where the MAC Address list was cleared when disabling MAC Address Filter in WiFi settings.
• Fixed an issue where port network selection was unavailable for Flex Mini switches.

Latest release improves device compatibility and fixes connectivity issues for Mobility devices.

Improvements

• Improved the Express 7 MLO Boost banner on the Dashboard with a more compact layout.

Bugfixes

• Fixed an issue where CloudKey+ could fail to be recognized correctly.
• Fixed an issue where Mobility devices could not be opened from Site Manager.
• Fixed an issue where Remote Adoption did not work with devices running the latest firmware.

This release brings an improved switch stacking experience, mesh link health widget for Express 7 setups, expanded port configuration options, updated WiFi settings, and more.

Improvements

• Added advanced port configuration options, including STP settings, Energy Efficient Ethernet (EEE), SD-WAN Underlay, Port Mode (STP Edge), Multicast Router Port Mode, and long-distance link speeds.
• Added a Mesh Link Health widget to the Dashboard for Express 7 setups.
• Redesigned WiFi settings with reorganized sections, an Allow Empty Password option, and improved validation.
• Added system statistics charts to Insights for UPS and PDU devices.
• Added Interference-Aware Auto Channel Selection to WiFi Doctor.
• Added an ISP branding banner to Settings.
• Added client group management to the Clients page filter menu.
• Added a Shadow Mode card and details to High Availability settings.
• Added an outlet card to the gateway Overview on supported devices.
• Added an IKEv2 Seamless Rekeying option to Device Services.
• Added PoE+++ support to Insights Ports.
• Added monthly data usage to the ISP Health Dashboard widget.
• Added total purchased data to the eSIM details screen.
• Added 5G carrier connection stages to device details.
• Added a Network Not Authorized warning to the SIM details page.
• Improved the switch stacking experience with per-unit port diagrams, collapsible stack views, unit selection on the Overview and Insights pages, and a combined Downlinks & Clients screen.
• Improved SIM Settings error handling with a link to the feedback form.
• Improved fast scrolling in Flows and System Logs.
• Improved hostname validation for UTR devices.
• Improved Dashboard performance on large deployments.
• Updated the default Flows time range to one day.
• Updated Teleport and VPN settings with the latest user interface.
• Changed the default Insights Ports filter to In Use.

Bugfixes

• Fixed an issue where selecting a port profile could incorrectly change the operation mode to Switching.
• Fixed an issue where backup files could fail to upload when connected remotely.
• Fixed an issue where detaching from Fabrics Orchestration failed in Spectrum Optimizer.
• Fixed an issue where the Enable 6 GHz Extended Range prompt appeared only after leaving the AP details screen.
• Fixed an error on the UPS device details screen after the app process was restored.
• Fixed an issue where the saved connection form did not open the console after sign-in.
• Fixed an issue where the VPN client was not preselected in System Logs when opened from client details.
• Fixed incorrect icons on the Safe Shutdown Pairing card.
• Fixed an issue where Low Performance Mode could appear when unavailable.
• Fixed a crash when opening the Acknowledgments screen.
• Fixed an issue where configured UDR devices could be discovered over Bluetooth.
• Fixed incorrect credential errors when signing in to a console or standalone AP.
• Fixed incorrect battery status reporting on UPS 2U Pro while powered by AC.
• Fixed gateway subnet validation to reject addresses within the IPv4 loopback range.
• Fixed an issue where the port configuration screen did not preserve its scroll position.
• Fixed an issue where the Add eSIM button was always disabled on UDR 5G Max.

Additional information

Starting with this release, the UniFi Android mobile app requires Network 9.0 or later. Legacy Cloud Keys are no longer supported. New overlay is shown for Self-hosted Network server setups, advising migration to UniFi OS Server. See migration guide to install UniFi OS Server.

This release improves UTR Long-Range support and brings several improvements to the UTR experience.

Improvements

• Added LCM Management for UTR.
• Added Device section in Settings for UTR.
• Added compliance screen for UTR.
• Added dashboard state images for UTR-LR.
• Improved dashboard and uplink UI for UTR.
• Improved interface priority drag-to-rearrange touch area for UTR.
• Improved latency widget animations on the dashboard.
• Improved hostname validation for UTR.
• Improved reliability of UTR firmware upgrades.
• Renamed "Block on Disconnect" to "Kill Switch".
• Updated firmware update channel names and order.
• Restricted broadcast and multicast MAC addresses in UTR's MAC Clone feature.
• Reduced poll interval for WiFi uplink SSIDs for faster updates.

Bugfixes

• Fixed QR code scanning not recognizing AmneziaWG codes.
• Fixed client issues including unblocking clients, and clearing aliases.
• Fixed WiFi uplink widget skeleton on the dashboard.
• Fixed UTR's configuration not refreshing on wireless uplink change.

UniFi Android 10.39.6 the improvements and bugfixes below.

Improvements

• Added WiFi VLAN conflict warnings to the Dashboard and WiFi screen.
• Added total purchased data to the eSIM details screen.
• Improved the G6 Edge camera setup experience with updated timing, the correct camera image, and an aligned setup type selection screen.
• Improved Dashboard notification styling with consistent icons, colors, and spacing.

Bugfixes

• Fixed an issue where the Dashboard WAN widget did not refresh after returning to the app from the background.
• Fixed an issue where the Replacement Device button was missing for UPS Tower.
• Fixed a crash that could occur when saving device IP settings with an empty DNS1 field.

This release improves app stability and connectivity experience.

Improvements

• Added an informative overlay when the UniFi Network application is unavailable, such as during installation or updates.

Latest release brings improved UPS 2U Pro support and bugfixes.

Improvements

• Added UPS 2U Pro overview enhancements including estimated battery runtime and operation info.
• Added Grid Voltage Sensitivity and Emergency Power Off (EPO) options to UPS device settings.
• Added power cycle delay configuration and moved Power Cycle to UPS settings tab.
• Added Safe Shutdown pairing improvements including "Take Over" option when a device is paired to a different UPS.
• Added "Configure" button for UPS 2U Pro device outlets.
• Added LED and Screen settings support for UPS 2U Pro.

Bugfixes

• Fixed UPS showing "Time Until Empty" instead of "Ready" when battery was fully charged.
• Fixed UPS 2U Pro battery status incorrectly showing when the device is powered by AC.
• Fixed Safe Shutdown Pairing card not displaying icons correctly.
• Fixed "Select Setup Type" screen content getting covered by Android navigation bars.
• Fixed paused Content Filter rule not opening on tap.

Latest release improves device setup experience and fixes several stability issues.

Improvements

• Added IdP login support for Fabric and MSP Group administrators using SAML authentication.
• Added account suitability check during console and UTR setup.

Bugfixes

• Fixed incorrect speed gauge formatting in non-English locales.
• Fixed a crash that could occur when reading VPN or certificate configuration files stored in cloud services, such as Google Drive.
• Fixed a crash that could occur when WebView screens were sent to the background.
• Fixed an issue where UTR could bypass the password requirement by opening the sign-in screen.

Latest release introduces the redesigned AV Manager, updates to Network settings and many QoL improvements.

Improvements

• Redesigned AV Manager with new home screen, input/output forms, video preview snapshots and calibration.
• Added support for IPv6 Additional IPs in Network settings.
• Added MTU and MSS options to VPN Client settings.
• Added Device and Content Wizard support to VPN Client settings.
• Added "Legacy Client Support" option to L2TP VPN Server form.
• Added connection logs and updated detail screen for VPN clients.
• Added "Release Notes" and "Update Version" to System Logs device update events.
• Added "Mute Notifications" option to Alarm Manager.
• Added PSU and Fan Utilization card to device Overview page.
• Added NUT Server and NUT Clients cards for UPS devices.
• Added "High Availability" section to settings.
• Added Network Lists to Settings Overview screen.
• Added Fabrics orchestration detach support across WiFi, Switch Isolation, and Global Switch settings.
• Added "Change to LAN" option for non-primary WAN ports.
• Added PoE Mode change confirmation dialog.
• Added QoS bandwidth limit unit selection (Mbps/Kbps).
• Added "Update Available" filter to Devices screen.
• Moved Firewall Connection Tracking and Auto Firewall State Timeouts to console services settings.
• Added Global NAT Settings to gateway services settings.
• Added OpenVPN config file validation for UTR connections.
• Improved SFP Transceiver barcode scanning with vendor and product matching.

Bugfixes

• Disabled 6 GHz channel configuration when radio is used as MLO STR uplink.
• Fixed Local Management Credentials screen not following app theme during Offline Console Setup.
• Fixed "Saved Connection" failing to connect on first attempt.
• Fixed keyboard insets not handled correctly in Gateway WAN Setup screen.
• Fixed hosts not loading in gateway setup when internet connection is unavailable at first.
• Fixed VLAN Diagram showing only first two WAN ports.
• Fixed back button not working in Device Tag screen opened from device settings.
• Fixed VPN clients not appearing in System Logs filters.
• Fixed "Add" button not working when adding port to Network List.
• Fixed discard changes dialog showing incorrectly when navigating back from port mirroring configuration.
• Fixed missing validation for WireGuard user routes and static route conflicts.
• Fixed eSIM activation when device is used as primary internet source.

UniFi Android 10.38.2 adds support for EAV switches, messages for Fabrics orchestrated configurations, and many settings improvements.

Improvements

• Added support for EAV switches.
• Added a lock icon and informational message when configuration is managed by Fabrics and cannot be edited locally.
• Added a Management Port section to the device overview page.
• Added an outdated Network application warning to the Dashboard when using an outdated version.
• Added IPv6 support to the WireGuard VPN client form.
• Added a “Listen On” option to WireGuard VPN Server settings.
• Added a “Use Alternate Address for Clients” option to VPN Server settings.
• Added MSS and MTU fields to the VPN Server settings form.
• Added a prefilled name field when creating a new VPN Server.
• Added SSH key management to the Device Updates & Settings screen.
• Added a “Power-Off Buzzer” option to UPS device settings.
• Added support for management ports in the port configuration screen.
• Added screen settings for consoles with LCM, including Rack Multi-Screen Synchronization.
• Added UTR Teleport support for non-owner admins.
• Added a latency widget to the UTR Dashboard.
• Added a confirmation dialog when attempting to update UTR.
• Added a certified carriers message to the U5G overview page for US locations.
• Added support for non-owner admins to initiate Teleport from the WiFiman app when supported.
• Added validation for SSH passwords in Device Updates & Settings.
• Improved alignment of DNS and Local IP warnings in Site-to-Site VPN settings.
• Improved the Device Updates & Settings warning user interface.
• Improved alignment of section, entry, and admin names in System Logs detail view.
• Included device model information in NUT server login credential details.
• Prefilled Local and Remote Auth IDs for existing IPsec Site-to-Site VPN configurations when Auto is selected.
• WireGuard Server private and public keys are now hidden by default with a reveal button.
• Renamed IP Groups to Network Lists.
• Disabled auto-correct for password fields on UTR screens.

Bugfixes

• Fixed an issue where VPN clients were not shown when using Network Application 10.4.36 or newer.
• Fixed incorrect link speeds displayed for QSFP WAN ports during console setup.
• Fixed an issue where the discovery screen could not be opened from the UTR Dashboard.
• Fixed an issue where WireGuard configuration file validation messages were not shown in VPN Client.
• Fixed an issue where OpenVPN Site-to-Site configuration could not be saved when IPsec contained invalid fields.
• Fixed an issue where the “Adopt” button was missing for gateway devices and improved adoption limit handling on cloud consoles.
• Fixed an issue where Device Updates did not load after the first console setup.
• Fixed an issue where Device Updates & Settings did not load after returning from the background.
• Fixed an issue where Meshing settings were not saved for regular APs.
• Fixed an issue where the device ports diagram did not persist the scroll state.
• Fixed an issue where extra blank space appeared at the top of the device overview screen.
• Fixed an issue where “Organization Master” hosts appeared in Site Manager without access permissions.
• Fixed an issue where the QoS shortcut was shown when the Zone-Based Firewall was unavailable.
• Fixed an issue where the System Logs Admin Activity detail screen did not load after process death.

Latest release introduces saved networks to UTR and WireGuard VPN Server improvements.

Improvements

• Added Teleport support for non-owner users on UTR.
• Added a latency widget to the UTR Dashboard.
• Added Saved Networks support for UTR.
• Added confirmation dialog when attempting to update UTR.
• Added SSH authentication to the Device Updates & Settings screen.
• Added a “Check for Updates” button and Control Plane warning to Device Updates settings.
• Added basic IPv6 support to WireGuard VPN Server settings.
• Added a Gateway/Subnet configuration screen to WireGuard VPN Server settings.
• Improved UTR WiFi uplink connection reliability.
• Improved Insights and port filtering, and added a reset filters button to the empty state.

Bugfixes

• Fixed an issue where the UTR LAN port incorrectly appeared as connected.
• Fixed an issue preventing IGMP Snooping settings from being saved on Network 10.2.0 and later.
• Fixed an issue where the “Meshing” option was displayed on consoles without WiFi support.
• Fixed an issue where scroll position was not preserved in the Clients and Devices screens.
• Fixed an issue where selected filters in Insights Ports were lost when those filters became unavailable.

This release introduces Air Wire support along with improved Insights Ports and various bugfixes.

Improvements

• Added AirWire support.
• Added Hardware Acceleration to Console's Services settings.
• Added WINS Server to VPN and Network DHCP settings.
• Added NUT Server settings for UPS devices.
• Added Default Security Posture selection to Global Network Settings.
• Added support for navigating to the colocated console from the Dashboard's app switcher.
• Added support-ending warnings to Dashboard.
• Added "Having Issues?" feedback form with contextual information sharing.
• Added pull-to-refresh to System Logs.
• Added L3 adoption support with a UniFi OS Server as the host.
• Added barcode scanner to SFP Wizard's Recovery flow and Release Channel selection.
• Added new Power Cycle sub-category and additional events to System Logs.
• Added a message to the Dashboard when using a legacy host or an outdated Network application.
• Improved meshing signal strength widget in device detail header.
• Improved client and device filtering with side-by-side layout on large screens.
• Redesigned Insights Ports with device grouping, connected device info, ISP details, last connection, speed capabilities, port mode, and port status.
• Updated Site-to-Site VPN settings with MTU/MSS options, Local/Remote Authentication IDs, and improved IPsec network configuration.
• Separated Radios and Meshing configuration.
• Moved radios in the device's overview page to the header card.

Bugfixes

• Fixed enabling and disabling of UTR's LAN port.
• Fixed Port Mirroring not being saved correctly.
• Fixed the issue where the save button was not visible in Site Management settings.
• Fixed the device name screen loading indefinitely in device detail settings.
• Fixed placeholder ISP image showing as a solid color circle.
• Fixed Switch's STP Priority not being saved.
• Fixed the missing LED switch in the UniFi OS Settings.
• Fixed Standalone AP validation not allowing valid configuration submission.
• Fixed the UTR WiFi uplink list showing empty while the scan is still running.
• Fixed DHCP handling for VLAN-only networks.
• Fixed the "Go to Site Manager" button overlapping the navigation bar in the Blueprint setup.
• Fixed Standalone AP firmware version not displayed when opened from Discovery.
• Fixed the closing of the remote console screen when the selected SSO account changes.

• Added QoS Rule section to System Logs.
• Added Advanced WAN settings for UCG Industrial WAN3 during setup.

Bugfixes

• Fixed an issue where Advanced WAN settings could not be saved during setup.
• Fixed an issue that caused the U5G Max SIM input screen to fail to load properly.

This release adds feedback form to WiFi Doctor and introduces several UI refinements across the app.

Improvements

• Added option to disable LAN port on UTR.
• Added confirmation dialogs when updating device firmware or UOS applications.
• Added target version information when updating device firmware..
• Added "Having Issues" feedback form to WiFi Doctor.
• Added support for new system logs events.

Bugfixes

• Fixed region blocking not loading on some setups.
• Fixed going back from "Tag Management" screen.
• Fixed remote console screen not closing when selected SSO account changes.
• Fixed changelog link not opening the correct webpage.

This release introduces WiFi Doctor, Device Tags, and UTR improvements.

Improvements

• Added WiFi Doctor to improve network diagnostics (requires Network Application 10.1.78 or newer).
• Added Device Tags to improve device organization.
• Added support for MAC address cloning on UTR.
• Added manual WireGuard configuration on UTR.
• Added a Kill Switch option to the UTR VPN configuration.
• Added release channel selection and custom firmware update support to UTR.
• Improved captive portal detection on UTR.
• Updated Shadow Mode with a redesigned user interface and improved user experience.
• Added a lock icon to settings overview items managed by Fabrics.
• Added content filter items to the settings overview.
• Added a Power Supply Unit utilization widget to device detail screens for supported devices.
• Improved UBB management with individual LED status indicators for paired Access Points and Stations.
• Improved the user experience for configuring client aliases and notes.
• Improved the standalone device login user experience.

Bugfixes

• Fixed issues in the device setup flow for various devices.
• Fixed an issue where the Save button in Network Settings remained disabled after generating a new IP or subnet.
• Fixed Firewall Zone selection issues in Network Settings.
• Fixed issues with System Logs filtering and filter persistence.
• Fixed a missing Save button on the Port Configuration QoS screen.
• Fixed an issue where Report Problem from the account screen did not work when the user was not logged in.

This release introduces improved System Logs filtering and enhancements to UPS and PDU management.

Bugfixes

Improvements

• Enhanced System Logs with comprehensive filtering options, including categories, devices, and admins.
• Added PDU actions based on UPS power status to Alarm Manager.
• Added support for Unified Outlets Info (Auto Relay) for UPS devices in the outlet diagram.
• Added MAC address and WiFi channel information to mesh parent selection items.
• Added support for UBB unpairing and single mode.
• Added confirmation dialog when attempting to update devices from the device list.
• Added stages and status display during 5G eSIM activation.
• Improved device filtering with new "Show More" subscreen.
• Updated colors in Dashboard's AP Deployments widget.
• Renamed "Existing Configuration" to "Load Configuration".

Bugfixes

• Fixed Band Steering not being disabled when only a single WiFi band is selected.
• Fixed SLA list not getting updated when a new SLA is created.
• Fixed the inability to configure 0% LED brightness.
• Fixed: devices not being selected when editing BGP rules.
• Fixed the "Add New" toolbar button visibility issue on the BGP list page in dark theme.
• Fixed the issue where the WiFi Security and NAS ID screens failed to load after saving the WiFi settings.
• Fixed UDB Switch's port incorrectly showing as disabled.
• Fixed: mesh parent not being applied correctly for UBB-type devices.
• Fixed the client detail screen not loading when opened from the switch's device detail page.
• Fixed the inability to configure UPnP when editing WAN settings.
• Fixed client's IP settings showing a 'discard changes' dialog even when no changes were made.
• Fixed "Interim Update Interval" validation in Radius Profile settings.
• Fixed a crash when opening a discovered device from the Discovery screen.

This release includes improvements to UniFi Travel Router (UTR) functionality and user experience.

Improvements

• Added already configured UTRs to the discovery pop-up.
• Improved sorting of countries in UTR settings.
• Improved handling of long site names in UTR.
• Improved the overall user experience.

Bugfixes

• Fixed UTR firmware update not showing up when available.
• Fixed the issue where the countries screen did not automatically scroll to the currently selected country.
• Fixed UTR screens not following the app's theme correctly.